030-8-0016 K30 1% CO2 Sensor
The K30 1% CO2 Sensor (030-8-0016) is intended to be built into different host devices that require CO2 monitoring indoors, this sensor modules comes with the ABC turned off.
It is an accurate, proven, low-cost solution for OEMs who want to integrate CO2 sensing into their products, research, and studies.
Features
- Perfect for residential, commercial, industrial HVAC or IAQ applications
- Simple to install, pre-calibrated and ready-to-use
- Proven reliability, low cost
- Maintenance free in normal applications
- Flexible analog and digital outputs
CO2Meter recommends that all first time users of this sensor purchase the CM-0024 Development Kit for the fastest and easiest results.
Models
(030-8-0016) - K30 1% CO2 Sensor Only- For integration into high-volume OEM products, includes Automatic Baseline Calibration (ABC) turned off.
CM-0024 - K30 10,000ppm CO2 Sensor Development Kit - Easy to use, simply plug the sensor module into your PC via USB. Use our free GasLab® software to measure and graph carbon dioxide or to configure the sensor or for data logging.
030-8-0006-C Customized K30 CO2 Sensor - Allows you to order custom analog or digital outputs for your application. After ordering, email or fax the Custom Outputs PDF form under the Documents tab and we will custom-configure your sensor’s settings. See the form for detailed instructions and available options. If the form is not received, your sensor will be delivered with the default specifications.
Specifications
CO2Meter recommends that all first time users of this sensor purchase the CM-0024 Development Kit for the fastest and easiest results.
- CO2 Measurement: non-dispersive infrared (NDIR)
- Measurement Range: 0 – 10,000 ppm (0-5,000 ppm within specifications)
- Rate of Measurement: every 2 seconds
- Response Time Diffusion: 20 seconds
- Response Time Sample Draw: 2 seconds @ .5 l/min tube gas flow
- Warm-up Time: < 1 min. (@ full specs < 15 min)
- Outputs. 2 analog, 2 digital
- Scalable Analog voltage outputs
- Each digital output has threshold and hysteresis
- Programmable Range: 0-10,000 ppm (custom configuration required)
- Repeatability: ± 20 ppm ± 1 % of measured value within specifications
- Accuracy: ± 30 ppm ± 3 % of measured value within specifications
- Maintenance Interval: no maintenance required
- Self-Diagnostics: complete function check at startup
- ABC (Automatic Background Calibration) enabled unless specified
- Dimensions: 51 mm x 58 mm x 12 mm
- Sensor Life Expectancy: > 15 years
Conforms with Standards
- Emission: EN61000-6-3:2001
- Immunity: EN61000-6-2:2001
- RoHS directive 2002/95/EG
Electrical / Mechanical
- Dimensions: 51 × 57 × 14 mm (Length x Width x approximate Height)
- Power Input: 5.5-14 VDC, stabilized to within 10% (external protection circuits required)
- Current Consumption: 40 mA average
- Sampling Method: diffusion (tube cap optional)
Warranty
- 90 days - See CO2Meter Terms and Conditions
Modbus Documentation Flexibility Counts (pdf)
Labview Examples for SenseAir K-30 (zip)
Web Application Using PHP and K30 DevKit (pdf)
Raspberry Pi UART Instructions (pdf)
Raspberry Pi UART Sample Code (zip)
Arduino UART Instructions (pdf)
Arduino UART Sample Code (zip)
SenseAir K30, Vaisala CMM222C, ELT S100, KCD AN100 and GE Sensing T6615 Sensor Comparison
Monitoring CO2 Levels Critical for Compost Success
Free-Air Concentration Enrichment and K30 1% CO2 Sensor
Study Shows SenseAir CO2 Sensor More Accurate than GE, Other Brands
Whitepaper: Why Customers Choose the SenseAir K30 CO2 Sensor
School Science Fair Project Uses SenseAir CO2 Sensors
Haney Test Uses CO2 Sensor to Measure Soil Health
Student project combines CO2 sensor, Arduino Uno
SenseAir CO2 Sensor Competes with CRDS Unit that Costs Thousands More
K-30 Sensors Used in Experiment to Test Growing Crops in Space
Custom Output
Output Configuration Options (pdf)
Custom Outputs E-Mail Form (pdf)
Instructions:
1. Download the PDF form above and save to your hard drive.
2. Open the PDF and enter your values in the fields. Save.
3. Please specify in the form if you wish the ABC
(Automatic Background Calibration) on or off.
4. Please specify in the form if you want to program the
sensor for communication with RS-485.
5. Email as an attachment to sales@co2meter.com and reference your order code.
6. Select K30 1% Custom and complete your order.
Free Easy-to-use GasLab™ Software
This device uses GasLab® software for setup, calibration, data logging, and real-time data analysis. GasLab® makes it easy to export data into a .CSV file that can be imported into any industry-standard software or spreadsheet. GasLab® runs on Windows XP or higher, and free to use with our products.
Accessories
- Tube Cap Adapter changes the sensor from reading CO2 in the air to a sample draw sensor. Use with a pump, tubing and filters to read CO2 levels in enclosed containers
- Sample Draw Pump Kit includes all the components you need with a sample draw sensor.
- Probe Enclosure for Development Kits. Includes hydrophobic filters, protects the sensor when used in hostile environments.
-
Data Sheets
-
Manuals
-
Technical Documents
-
Videos
-
Additional Resources
-
Case Studies