Oxygen Sensor for Multi Gas Safety System
The Oxygen Sensor for Multi Gas Safety System is designed to ensure gas safety and monitor oxygen levels down to -50°C across a variety of industry applications. This sensor integrates with our Multi Gas Safety System.
It uses advanced zirconia sensing to monitor and detect leaks of high concentrations, protecting staff when working near nitrogen, argon, helium and other gases.
Features
- Monitor oxygen levels down to -50°C with real-time oxygen level readout
- Monitor CO2 and O2 on the same system (eliminate multiple controls on a single system)
- Audible and visual alarms to protect staff near potential hazards
- 3 user-configurable alarms (default is set at OSHA code)
- The remote display can be mounted up to 300 feet away
- Easy to install, uses standard RJ45 and CAT-5e/CAT6 cables
- International Power Supply (included)
- 10+ years of sensor life
Per both the Occupational Safety and Health Administration (OSHA) and National Institute of Health (NIH) hazardous conditions may include areas where the oxygen concentrations fall below 19.5% or above 23.5% and require oxygen deficiency monitors.
Components
The Multi Gas Safety System allows you to pick and choose only the components you need to create a fully integrated system. See them below, or contact a CO2Meter expert for more information on your application.
- Oxygen Sensor for Multi Gas Safety System shown here (CM-7103)
- Tablet for Multi Gas Safety System (CM-7005)
- CO2 Sensor for Multi Gas Safety System (CM-7003)
- Relay for Multi Gas Safety System (CM-7002)
- Horn Strobe for Multi Gas Safety System (CM-7004)
- Exterior Horn Strobe for Multi Gas Safety System (CM-7004-OUT)
- Tablet for Multi Gas Safety System (CM-7006)
- Strobe Tower (CM-1026-5)
- 3/8" Solenoid Shut Off Valve (SV-1029)
- 1/2" Solenoid Shut Off Valve (SV-1030)
Specifications
-
Oxygen Measurement: Zirconium Oxide (ZR)
-
Measurement Range: 0-23%
-
Measurement Interval: 2 Seconds
- Maintenance Interval: Annual Ambient Calibration
- Connections: Input / Output / Strobe - CAT5 8 pin connector
- Response Time: 90% at 10 minutes
- Sensor Reading Frequency: 0.5 Hz
-
Alarm Levels (O2 Deficiency): AL1 19.5%, AL2 16.5%, and AL3 12%.
- Alarm Response Time: < 60 seconds
- Operating Temperature: -58°F to 122°F (-50°C to 50°C)
-
Sensor Life Expectancy: >10 years
Electrical
- Power Supply: POE via CM-7000 Series System
- Power Input: POE via CM-7000 Series System
- 4-20mA outputs: 0-23% O2 Scaled
- Mounting Height: Variable by application 12-72 in. from the ground
- *Please note: the use of surge protector is required for optimum accuracy and longevity of your device*
Warranty
- 1 year on the device - See CO2Meter Terms + Conditions.
Accessories
The Multi Gas Safety System starts with the CM-7005 tablet. Click on any of the add-on items it can control for more information.
- Tablet for Multi Gas Safety System (CM-7005) - Provides a single central display unit for monitoring both carbon dioxide levels or oxygen levels across multiple locations.
- Carbon Dioxide Sensor for Multi Gas Safety System (CM-7003) - Provides real-time CO2 readings for multiple sensors that are controlled by the CM-7005 CO2 multi sensor safety system tablet.
- Relay for Multi Gas Safety System (CM-7002) - Triggers third-party devices like an exhaust fan, building management system, fire panel or remotely notify security of a high CO2 alarm. Includes CBL-7002 below.
- Horn Strobe for Multi Gas Safety System (CM-7004) - Audible and visual strobe alarm used for interior placements.
- Exterior Horn Strobe for Multi Gas Safety System (CM-7004-OUT)- Audible and visual strobe alarm for exterior placements.
- Mini Display for Multi Gas Safety System (CM-7006) - Remote display that monitors all or a group of CO2 sensors.
- Strobe Tower CM-1026-5 - Provides a flashing indicator and audible alarm. Changes colors as the alarm level changes.
- Relay Cable CBL-7002 - Enables easy connectivity between the Remote Relay CM-7002, Strobe Tower CM-1026-5 or any external device that can be triggered by a relay.
- Solenoid Safety Shut Off Valve SV-1029 - 3/8 inch connector on electronic solenoid enables remote shut off during gas leak. Plugs into Remote Relay CM-7002 or Main Tablet relay.
- Solenoid Safety Shut Off Valve SV-1030 - 1/2 inch connector on electronic solenoid enables remote shut off during gas leak. Plugs into Remote Relay CM-7002 or Main Tablet relay.
- Calibration Gas - Because of MDOT regulations, calibration gases must be shipped from a certified gas supplier. You can order calibration gas from your local supplier or you can order the following products from CalGasDirect.com.
CV-2 Regulator
3ft Vinyl Tubing
-
Data Sheets
-
Manuals
-
Technical Documents
-
Videos
-
Additional Resources
-
Case Studies