In observance of the holiday, CO2Meter will be closed Friday, March 29th, and will resume operations Monday, April 1st, 2024.

Oxygen Deficiency Depletion Safety Alarm

Oxygen Deficiency Alarm for Low Temperature - CO2 Meter
Regular price $1,599.00

POs or wholesale quantity discounts click here

The Oxygen (O2) Deficiency Safety Alarm is a 0-23% room oxygen monitor designed to protect staff from oxygen depletion.  This device is designed to be mounted near nitrogen, argon, helium or other inert gas sources. It can also be used in walk-in refrigerators or freezers with temperatures as low as -50°C. 

Our Oxygen Deficiency Safety Alarm is used in hospitals, laboratories, pharmaceuticals, cryogenics, process cooling, freezers, manufacturing and research facilities.

Features

  • Provides 24/7 protection for you and your staff against oxygen deficiency
  • 90db audible and visual alarm on the sensor and remote display (90db)
  • 3 user-configurable alarms meet all OSHA codes
  • The remote display can be mounted up to 300 feet away
  • Long-life zirconium oxide sensor, lasts up to 10+ years!

Add-On Options

Specifications

  • Measurement Range: 0-23% display
  • Display Resolution: 0.1%
  • Accuracy: Better than 2% FS
  • Pressure Dependence: Not pressure dependent
  • Response Time: O2: <2min by 90%
  • O2 Deficiency Alarms (default): AL1 19.5%, AL2 16.5%, and AL3 12%.
  • Sound Alarm: 90db @ 10cm
  • Alarm Response Time: < 60 seconds
  • Warm-Up Time: 600 seconds (10 min) for full operating temperature range
  • Operating Temperature: -58°F to 122°F (-50°C to 50°C)
  • Sensor Life Expectancy: 10+ years
  • Weight: 1.5lbs (Monitor only)
  • Dimensions: 8.25 in x 7.8 in x 3 in

    Electrical

    • Power Supply: Output: 12VDC, 2000mA.
    • Power Input: 100~240 VAC, 50/60Hz, 0.6A (25 ft. Ethernet cable - included)
    • Power Consumption: 3 Watts
    • 6 VDC battery backup connections
    • Relays: Peak Current < 2A @ 30 VDC or 250 VAC, SPDT
    • 4-20mA output
    *Please note: the use of surge protector is required for optimum accuracy and longevity of your device*

      Warranty

      Accessories

      • RAD-0022-ZR: Remote Display Add-On. This device is designed to provide additional read-outs to be connected for additional alarm points. (up to 3 read-outs per device).
      • CM-1027: Dual Strobe Add On Kit. Attach a flashing strobe to both the sensor and remote display to give a more visual alarm. Used in high-noise environments or where required by an inspector.
      • CM-1029: Industrial Strobe Siren. The Industrial Gas Strobe Siren is designed to provide an additional flashing indicator of a potential gas leak in indoor areas that are using/storing compressed gases.
      • Certificate of Calibration - Available on request in comments at purchase. For factory recalibration order part no. CAL-0001 here.
      • Data Sheets

      • Manuals

      • Technical Documents

      • Videos

      • Additional Resources

      • Case Studies

      Customer Reviews

      No reviews yet
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)

      "Easy to install, easy to set up, and easy calibration - just what I was looking for."

      - Phillip Farrar
      Water Plant Superintendent

      Read More Reviews...