LOX-O2 UV Flux 25% Oxygen Smart Sensor
The LOX-O2 UV Flux 25% Oxygen Sensor (formerly known as OX-0052) measures ambient oxygen levels using the principle of florescence quenching by oxygen. With patented technology, this sensor provides low power and a longer lifespan than EC and galvanic sensors.
Features
- Internally temperature compensated, no cross sensitivity
- Direct communication to UART, no signal conditioning circuitry required
- MX Board includes Barometric Pressure, Temperature and %RH Sensors
- Easy Integration; Compact & Low Power
Models
- LOX-O2 Sensor Only – for integration into high-volume OEM products.
- CM-42950 MX Board – Same functionality as the development kit without USB cable or software.
- CM-42951 Development Kit – Easy to use, simply plug the MX Board into your PC via the included serial UART to USB cable. Use our free GasLab® software to measure and graph oxygen, barometric pressure, temperature, and % relative humidity.
Specifications
- Measuring Gas: Oxygen
- Measurement Range: 0.1 to 25% O2
- Sensing Method: Fluorescence quenching by oxygen
- Measurement Interval: 1 Sample/second
- Response Time: < 60 Seconds
- Warm-Up Time: < 60 Seconds at 72°F (22°C)
- Accuracy: Better than 2% at full scale
- Resolution: 0.10% / 0.1mbar
- Temperature Accuracy: +/- 2 degrees C
- Operating Temperature: -30°C to +60°C
- Barometric Pressure Range: 500 to 1200 mbar
- Lifetime: > 5 years
Electrical / Mechanical
- Voltage: 4.5 - 5.5 VDC
- Current: < 6mA (streaming @ 1 Sample/sec), < 17mA Peak
- Interface: UART or analog
Warranty
- 90 days - See CO2Meter Terms and Conditions.
Case Studies
Free Easy-to-use GasLab® Software
This device uses GasLab® software for setup, calibration, data logging, and real-time data analysis. GasLab® makes it easy to export data into a .CSV file that can be imported into any industry-standard software or spreadsheet. GasLab® runs on Windows XP or higher, and free to use with our products.
System Requirements for Data Logging or Changing Defaults
- Windows XP SP2 or newer
- Microsoft .Net 3.5 Runtime Libraries.
Micro-Pump Kit includes all the tools you need to utilize the tube-cap adapters as part of a sampling sensor system.
Nafion Tubing is a highly selective, semi-permeable membrane to water vapor. If gases inside Nafion tubing are wetter than gases surrounding the tubing, drying will occur. If the surrounding gases are wetter, humidification will occur.
Micro Gas Sampling Pumps provide a constant flow of air across the sensor with a tube cap - perfect for bench-top testing of sensors for closed-loop sampling applications.
-
Data Sheets
-
Manuals
-
Technical Documents
-
Videos
-
Additional Resources
-
Case Studies