SKU:RAD-0002-ZR-KIT
Complete O2 Deficiency Safety Monitoring Kit
Verfügbarkeit für Abholungen konnte nicht geladen werden
The Complete O2 Deficiency Safety Monitoring Kit is a fully integrated O2 safety monitoring solution designed to detect hazardous oxygen, argon, or helium levels and provide immediate audible, visual, and power status alerts.
This all-in-one kit ensures your compliance by offering real-time O2 detection and multi-layered alerts in the event of dangerous gas levels or system power failure.
What's Included:
- RAD-0002-ZR-HS2 O2 Safety Alarm - industry-proven gas detector featuring a clear digital display, multiple alarm setpoints, and relay outputs. Ideal for enclosed spaces with O₂ gas systems.
- CM-HS2: Horn/Strobe Alert Combo - loud 90+ dB horns and high-visibility strobe provide immediate attention-grabbing warnings during elevated O2 conditions.
- RAD-PMU: Power Monitor Unit - continuously monitors system power and issues a warning if power is lost ensuring your safety system is never offline unnoticed.
Features
- Provides 24/7 protection for you and your staff against oxygen deficiency
- Audible and visual alarms on the sensor and horn strobes
- Power monitor unit meets IFC codes and alerts in the event of a power loss
- 3 user-configurable alarms meet all OSHA codes
- Long-life zirconium oxide sensor, lasts up to 10+ years
*A surge protector is required for safeguard and longevity of the monitor
Add-On Options
- RAD-0104 - Additional Remote Display (Supports up to 3 total)
- RAD-CDU-HS1 - Additional Centralized Display Unit (Supports 12 sensors)
-
RAD-PMU - Additional Power Monitor Unit (Alerts if Loss of Power)
- CM-HS2 - add-on kit includes 2 extension strobe lights and cables
Specifications
-
Measurement Range: 0-23% display
- Display Resolution: 0.1%
- Accuracy: Better than 2% FS
- Pressure Dependence: Not pressure dependent
- Response Time: O2: <2min by 90%
-
O2 Deficiency Alarms (default): AL1 19.5%, AL2 16.5%, and AL3 12%.
- Sound Alarm: 90db @ 10cm
- Alarm Response Time: < 60 seconds
- Warm-Up Time: 600 seconds (10 min) for full operating temperature range
- Operating Temperature: -58°F to 122°F (-50°C to 50°C)
- Sensor Life Expectancy: 10+ years
- Weight: 1.5lbs (Monitor only)
- Dimensions: 6.5 x 5.0 x 2.5 in
Electrical
- Power Supply: Output: 12VDC, 2000mA.
- Power Input: 100~240 VAC, 50/60Hz, 0.6A (25 ft. Ethernet cable - included)
- Power Consumption: 3 Watts
- 6 VDC battery backup connections
- Relays: Peak Current < 2A @ 30 VDC or 250 VAC, SPDT
- 4-20mA output
Warranty
- 1 year on the device - See CO2Meter Terms + Conditions.
Documents
RAD-0002-ZR-KIT: Data Sheet (pdf)
How to Hard Reset the RAD-0002-ZR (pdf)
Hard Wiring Your Oxygen Deficiency Safety Alarm (pdf)
Hard Wiring Your Safety Alarm to a PMU (pdf)
Exhaust Fan Relay Wiring Diagram (pdf)
SV-1029, SV-1030 Wiring Diagram (pdf)
RAD-0002-ZR Testing Procedures
RAD-0002-ZR Playlist: Unboxing, Installation
Accessories
- RAD-CDU - Central Display Unit. A central display that consolidates visual and audible alerts from up to eight remote CO2 sensors for easy, centralized monitoring.
-
RAD-PMU - Power Monitor Unit. A power monitor unit that indicates system status and alarms when the main CO2 safety device loses power
- RAD-0104 - Additional Remote Display.The Sensor display unit comes with one remote display that can be placed up to 300ft. away using CAT5 or greater Ethernet cable (28ft. included in the box). Purchase one or two additional remote displays, then daisy-chain them so long as the total run is less than 300 ft.
-
SV-1029 Solenoid Safety Shut Off Valve 3/8 inch- designed to be utilized with any of our remote storage safety alarms, and can be directly wired to the SV-1029 24/DC safety shut-off valve.
-
Data Sheets
-
Manuals
-
Technical Documents
-
Videos
-
Additional Resources
-
Case Studies
Find the Right Fit
Browse through a variety of options designed to meet diverse industry needs.
