SprintIR®-R 100% CO2 Sensor
The SprintIR®-R-100 (formerly known as the GC-0033) is designed to take 50 readings per second which makes it ideal for high speed sensing requirements. Typical applications for this sensor include healthcare, MAP, scientific, and medical environments.
Features
- Measures up to 100% CO2 Concentration
- Ultra-fast response rate - 50 Hz
- Solid-state, no moving parts, no heated filaments
- Digital (UART) output
- RoHS and REACH compliant
Models
-
SPRINTIR-R-100 100% Sensor Only – for integration into high-volume OEM products.
-
CM-20820 Sensor Board – Same functionality as the development kit without USB cable or software.
-
CM-20821 Development Kit – Easy to use, simply plug the Sensor Board into your PC via the included serial UART to USB cable. Use our free GasLab® software to measure and graph carbon dioxide (CO2).
Specifications
- CO2 Sensing Method: Patented solid-state NDIR absorption
- Sample Method: Flow through adapter
- Measurement Range: 0-100%
- Accuracy: 0-100% ±300ppm +/- 5% of reading @ STP
- Time of 1st Reading: <0.2 seconds
- Readings per Second: 50
- Resolution: 100ppm
- Measurement Noise: < 10% of reading with no digital filtering
- Pressure Dependence: 500mbar to 2bar
- Warm-up Time: < 30s.
- Response Time: Flow Rate Dependent
- Operating Conditions: 0°C to 50°C, 0 to 95% RH, non-condensing
- Storage Conditions: -30°C to +70°C
- Dimensions: 23.8mm x 24mm
- Weight: 7.5g
- Sensor Life Expectancy: >15 years
Electrical / Mechanical
- Power Input: 3.25V to 5.5V (3.3V recommended)
- Peak Current: Average Current: <15mA
- Power Consumption: 100mW @ 3.3V
- Measurement Output/Interface: UART
Warranty
- 90 days - See CO2Meter Terms and Conditions
Free Easy-to-use GasLab® Software
This device uses GasLab® software for setup, calibration, data logging, and real-time data analysis. GasLab® makes it easy to export data into a .CSV file that can be imported into any industry-standard software or spreadsheet. GasLab® runs on Windows XP or higher, and is free to use with our products.
CM-0032-6S/R - Custom USB cable enables communication to GasLab Software for Sensor Board and Development Kit.
Micro-Pump Kit includes all the tools you need to utilize the tube-cap adapters as part of a sampling sensor system.
Nafion Tubing is a highly selective, semi-permeable membrane to water vapor. If gases inside Nafion tubing are wetter than gases surrounding the tubing, drying will occur. If the surrounding gases are wetter, humidification will occur.
Micro Gas Sampling Pumps provide a constant flow of air across the sensor with a tube cap - perfect for bench-top testing of sensors for closed-loop sampling applications.
-
Data Sheets
-
Manuals
-
Technical Documents
-
Videos
-
Additional Resources
-
Case Studies