Oxygen Enrichment Safety Alarm

Oxygen Enrichment Safety Alarm
Normaler Preis €1.515,47

POs or wholesale quantity discounts click here

The Oxygen (O2) Enrichment Safety Alarm is an  ambient oxygen enrichment monitor which is simple to use and maintain. The RAD-0002-ZR-E consists of a wall mounted main sensor unit and a display. It is ranged from 0 to 25% O2 and has both audible/visual alarms set points that meet OSHA/NIOSH standards.

Industries that store and operate with high levels of oxygen need to detect and monitor the levels of oxygen should there be a leak of enriched O2, as this could prove
to be a fire risk.

Our Oxygen Enrichment Safety Alarm is used across a variety of industries such as: commercial dive systems, hyperbaric oxygen therapy (HBOT), gas production and gas blending stations, medical and laboratory applications, mining, steel
manufacture and metal refining, aquaculture and glass manufacturing.

Features

  • 24/7 protection for you and your staff against oxygen enriched atmospheres
  • 90db audible and visual alarm on the sensor and remote display (90db)
  • 3 user-configurable alarms meet all OSHA codes
  • The remote display can be mounted up to 300 feet away
  • Long-life zirconium oxide sensor, lasts up to 10+years

Add-On Options

Specifications

  • Measurement Range: 0-25% display
  • Display Resolution: 0.1%
  • Accuracy: Better than 2% FS
  • Pressure Dependence: Not pressure dependent
  • Response Time: O2: <2min by 90%
  • O2 Enrichment Alarms (default): AL1 22%, AL2 24%, and AL3 25%.
  • Sound Alarm: 90db @ 10cm
  • Alarm Response Time: < 60 seconds
  • Warm-Up Time: 600 seconds (10 min) for full operating temperature range
  • Operating Temperature: -58°F to 122°F (-50°C to 50°C)
  • Sensor Life Expectancy: 10+ years
  • Weight: 1.5lbs (Monitor only)
  • Dimensions: 8.25 in x 7.8 in x 3 in

    Electrical

    • Power Supply: Output: 12VDC, 2000mA.
    • Power Input: 100~240 VAC, 50/60Hz, 0.6A (25 ft. Ethernet cable - included)
    • Power Consumption: 3 Watts
    • 6 VDC battery backup connections
    • Relays: Peak Current < 2A @ 30 VDC or 250 VAC, SPDT
    • 4-20mA output
    *Please note: the use of surge protector is required for optimum accuracy and longevity of your device*

      Warranty

      Accessories

      • RAD-0022-ZR-E: Remote Display Add-On. This device is designed to provide additional read-outs to be connected for additional alarm points. (up to 3 read-outs per device)
      • CM-1027: Dual Strobe Add On Kit. Attach a flashing strobe to both the sensor and remote display to give a more visual alarm. Used in high-noise environments or where required by an inspector
      • Certificate of Calibration - Available on request in comments at purchase. For factory recalibration order part no. CAL-0001 here.
      • Data Sheets

      • Manuals

      • Technical Documents

      • Videos

      • Additional Resources

      • Case Studies

      Customer Reviews

      Be the first to write a review
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)

      "Easy to install, easy to set up, and easy calibration - just what I was looking for."

      - Phillip Farrar
      Water Plant Superintendent

      Read More Reviews...