🚚 Next Day Delivery Options ✈️ In-Stock Ready to Ship 👉 Shop All Products

 

What is a Weld Purge Monitor?

Weld purge monitor for stainless steel tubing welding

What is a weld purge monitor?

A weld purge monitor verifies that all of the oxygen has been purged from the back side weld. It is a type of trace oxygen analyzer specifically designed for industrial use.

Weld purge monitors are typically used during TIG welding of stainless steel, titanium, nickel or zirconium alloys. If oxygen gas is present at the weld point an inferior weld can occur.

Weld purge monitors are most often used to verify low oxygen levels when welding pipe or a hollow metal design where precise welds are critical. For example, they are used in the construction of food processing equipment, power plants, aircraft submarines, or anywhere a defective weld could have catastrophic  or deadly results.

How does a weld purge monitor work?

A weld purge monitor is an essential tool for measuring oxygen levels during welding processes, ensuring the weld environment remains free of contaminants.

By monitoring and controlling the oxygen content in the purge gas—typically argon or nitrogen—these devices help maintain a low-oxygen atmosphere, which is critical to producing high-quality welds, especially in stainless steel, titanium, and other reactive metals. The purge monitor measures oxygen levels in parts per million (ppm), allowing welders to know exactly when it is safe to begin the weld, thereby preventing oxidation and weld defects.

In addition, weld purge monitors work by using highly sensitive oxygen sensors to detect even trace amounts of oxygen. Once the purge area reaches the desired oxygen level, usually below 100 ppm for stainless steel, the monitor signals that welding can safely commence.

This process helps ensure a cleaner, stronger weld, reduces post-weld cleanup, and prevents costly rework. Utilizing a purge monitor not only improves weld integrity but also helps companies comply with industry standards for welding quality, making it a vital tool in industries like aerospace, petrochemical, and food processing.

What are weld purging benefits?

  • Saves time. No need to rely on a rough estimation of time to purge pipe. Welding can begin the moment purging is complete.
  • Saves money. Verifying when purging is complete reduces purge gas consumption to only the amount needed.
  • Saves product. Welding is never started before purging is complete. This reduces scrap by producing a top-quality weld every time.

Shop CO2Meter Welding Gas Solutions

Why is weld purging important?

TIG welders are often asked to fix a pipe crack or leak from an improperly purged weld. The problem began when the original welder used a welding purge plug on one end of a pipe and aluminum tape on the other end to seal the interior for an argon gas purge. The original welder purged the pipe “for a while” until they guessed it was full of argon, and then started welding. Because argon is a colorless, odorless inert gas they have no way of verifying if all the oxygen is purged from the backside of the weld.

In addition, weld purging is even more vital due to its ability to prevent oxidation and avoid discoloration and weld under bead discontinuities. By using a weld purge monitor it can provide integrity and quality of welded joints, especially when working with reactive metals like stainless steel, titanium, and aluminum

By removing oxygen, moisture, and other atmospheric gases from the weld zone, purging helps prevent oxidation, discoloration, and weakened welds that can lead to costly rework or failure in critical applications. Maintaining a controlled, low-oxygen environment during welding ensures a smooth, clean weld bead, improves corrosion resistance, and enhances the overall durability of the weld. 

TIG welding of stainless steel

What is the process of weld purging?

The most common way to remove gas from the weld zone is to flush it away with inert gas. The weld zone can be contained to prevent fresh gas from entering once the contained volume has been purged.

Once the weld is complete, the only verification that the purge successfully removed the oxygen from the backside of the weld is to visually examine it for carbide precipitation or “sugaring. If the backside of the weld cannot be seen, they may assume that because they used argon gas to purge the weld it is “good.”

In other cases, when welding a long stretch of stainless steel pipe the welder may start welding before the purge is complete. Depending on the length of the pipe, it may take hours to completely fill a pipe with argon gas. Even if the welder uses weld purge paper or inflatable stoppers to create a purge dam (not always allowed) they still cannot guarantee the oxygen purge was complete.

The issue of improperly back-purged welds becomes compounded when a TIG welding job is sub-contracted. Unless the contractor requires x-ray inspection of every weld, only a trace oxygen analyzer with data logging can verify the complete purging of oxygen before welding is started.

Benefits of using a weld purge monitor in your welding process

Incorporating a weld purge monitor into your welding process offers numerous advantages that enhance both quality and efficiency. One of the primary benefits is the ability to achieve a precise low-oxygen environment, which is critical for creating clean, contamination-free welds. By continuously monitoring the oxygen levels in the purge gas, these devices ensure welders can begin welding only when optimal conditions are met.

This not only reduces oxidation and discoloration but also improves the mechanical strength and corrosion resistance of the final weld, minimizing the need for costly rework or post-weld cleaning.

Additional Benefits of Weld Purge Monitors in Weld Processes:

  • Ensures precise low-oxygen environments for contamination-free welds
  • Reduces oxidation, discoloration, and weld defects
  • Improves mechanical strength and corrosion resistance of the weld
  • Minimizes the need for costly rework or post-weld cleaning
  • Optimizes gas usage, reducing material waste and over-purging
  • Enhances overall welding efficiency and productivity
  • Supports compliance with industry standards
  • Contributes to product performance and increased longevity of weld 

Are weld purge monitors used for TIG or MIG welding?

Weld purging is most often used in Metal Inert Gas (MIG) welding and Tungsten Inert Gas (TIG) welding, also known as Gas Tungsten Arc welding (GTAW).

While both MIG and TIG welding use an electric arc to create the weld, MIG is more common because it can be used on steel, stainless steel and aluminum of almost any thickness. TIG welding can be used on more kinds of metals or can be used to weld 2 dissimilar metals. However, both MIG and TIG depend on shield gases to create good welds.

What is gas plume measurement?

Another factor to keep in mind during welding is the weld plume. The dimension of the plumes are important. The plume needs to be large enough to cover the entire area of the weld, and be at or very near the eutectic point where the metal loses its hardness and becomes receptive to oxidation and other undesirable processes.

The probe nature of the TecWeld allows the dimension of the plume to be measured. Too much flow will be indicated by an oversize plume, which can in turn cause inappropriate cooling at the weld point and cause the weld to become brittle. Brittleness can occur when the heavy element of the filler metal and the base alloy are joined and cooled at different times. This is sometimes referred to as the passivation of the weld, because it does not allow the stratification of the weld component from uncontrolled atmospheric or thermal conditions.

Oxidation in welding

Oxidation is a form of metal corrosion that forms during the welding process. Oxidation prevents a good weld from forming because too much oxygen enters the area where the weld is being created. Electrons move from the metal that is being welded to the oxygen molecules during the process. Too much oxygen in the welding environment leads to corrosion, which then in turns causes a weak and unreliable weld. Corrosion can be dangerous if it affects an integral inner structure such as buildings and bridges, pipes, and ships. A weakened infrastructure can put lives at risk, so reduce oxidation in welding is essential for safety.

An example of oxidation in welding is carbide precipitation, also called sugaring, which occurs on stainless steel. Sugaring is the result of the back side of the weld being exposed to oxygen in the atmosphere during the welding process. Even though the weld looks good from the front, it is weak at the backside and over time can display stress cracks. The best way to avoid sugaring is to purge the back of the weld with a shielding gas such as argon. This is especially important when welding pipe where you cannot view the backside of your weld.

How does a trace oxygen analyzer verify weld purging?

A portable trace oxygen analyzer measures the oxygen level near the backside of a weld down to the parts-per-million (ppm) level. A hollow stainless steel needle is inserted near the back side of a weld where a gas sample is taken. Purge dams are used to close off the area to be welded and the purge gas is applied. A micro-pump pulls the gas sample across a high-speed optochemical oxygen sensor and displays the oxygen level on the screen. Once the oxygen level measures 0% or less than 2 ppm the pipe can be considered “purged” and welding can be started.

An example of a trace oxygen analyzer for welding is the TecWeld TS-300 Weld Purge Monitor. This oxygen sensor provides accurate measurements down to 0% oxygen for back purging of oxygen during welding. Learn more about the TecWeld Portable Weld Purge Monitor here.

Types of weld purge monitors: which one is right for you?

There are several types of weld purge monitors available, each designed to meet specific welding requirements based on material type, industry standards, and project complexity.

CO2Meter offers two advanced weld purge monitors, the TS-300 and the TS-302, each designed to cater to specific welding applications.

TecWeld Purge Monitor

The TS-300 is ideal for standard welding projects that require basic oxygen level monitoring to maintain a clean weld environment. It measures oxygen levels in parts per million (ppm) and ensures that the welding zone remains below the threshold needed to prevent oxidation and discoloration. This model is a cost-effective option for industries working with less reactive metals like stainless steel, providing reliable performance at a competitive price point.

For more critical welding applications, the TS-302 offers higher precision and advanced features. This monitor is designed for projects where ultra-low oxygen levels are required and CO2 gas mix is being used during welding, offering both CO2 or O2 measurement capabilities.

Additionally, the TS-300 and TS-302 both come equipped with data logging capabilities, making it a superior choice for automated or large-scale welding operations that demand stringent quality control.

When selecting the right weld purge monitor for your needs, consider the type of metal you are working with, the specific purity requirements of your project, and whether you need real-time data feedback.

Investing in the right purge monitor can drastically improve weld quality, reduce rework, and ensure adherence to industry regulations. For more information on weld purge monitors or to ensure you are selecting the right device, contact us today.


Older Post Newer Post