*Please note that the CO2Meter offices will be closed starting at 5:00 pm et. October 8th to allow our team members time to prepare for the pending impact of Hurricane Milton. Orders placed after 2:00 pm et. October 8 will be held for shipment once our facilities reopen. All operations are expected to reopen October 14 at 8:30 am et.*

 

What is a CO2 Welding Gas Analyzer?

CO2 welding gas analyzer used during welding

A CO2 welding gas analyzer is a device used to measure the concentration of carbon dioxide in the shield gas used during welding. 

Shielding gases are used to protect the weld pool from atmospheric gases like oxygen, nitrogen, water vapor and particles which can cause defects to the weld. The most commonly used shielding gases in welding are typically a mixture of argon (AR) and carbon dioxide (CO2).

The concentration of carbon dioxide in the shielding gas can also affect the quality of the weld, as well as the welding process itself. For example, if the CO2 concentration is too high, it can cause porosity in the weld and decrease the overall quality and end result. On the other hand, if the CO2 concentration is too low, it can affect the arc stability and lead to inconsistent welds.

By using a CO2 gas analyzer during welding, welders can ensure that the CO2 concentration in the shielding gas is at the correct level for the specific welding process being used and modify it if necessary. This helps to improve the quality and consistency of the welds being produced and in turn provide greater results for the welder.

How does a CO2 gas analyzer work?

A CO2 gas analyzer works by sampling a small portion of the gas being used as the shielding gas and analyzing its overall composition.

While there are many different types of CO2 gas analyzers used in welding, one of the most common uses light absorption called a infrared (IR) absorption spectroscopy sensor. In this method, the gas sample is passed through a chamber that contains an IR source and a detector. The IR source emits infrared radiation of a specific wavelength that is absorbed by the CO2 molecules in the gas sample. The detector measures the amount of IR radiation that is absorbed by the CO2 molecules, which can be used to calculate the exact concentration of CO2 in the gas sample.

Another method used commonly to measure CO2 gas analysis is based on the principle of thermal conductivity. In this method, the gas sample is passed through a chamber containing two thermal conductivity sensors. One sensor is exposed to the gas sample and the other is exposed to a reference gas. As the gas sample passes through the chamber, the difference in thermal conductivity between the gas sample and the reference gas causes a change in temperature. This can then be used to calculate the concentration of CO2 in the gas sample.

While there are many different methods used to analyze CO2 in welding applications, they all provide real-time measurement of the concentration of CO2 in the shielding gas during the welding process. This information can then be used to adjust the gas flow to ensure that the CO2 concentration is within the desired range for the specific welding process and application being used.

How accurate is a CO2 gas analyzer?

The accuracy of a CO2 gas analyzer depends on the specific analyzer used, its sensing method and the continued maintenance of the device itself. When we talk about accuracy of a CO2 gas analyzer, it helps to look at the range specified by the manufacturer.

In general, infrared absorption spectroscopy-based CO2 gas analyzers typically have an accuracy of ±0.1-0.2% of the measured value, while thermal conductivity-based analyzers have an accuracy of ±2-3% of the measured value. However, these values may vary depending on several factors such as the analyzer's model, gas flow rate, gas pressure and temperature.

To ensure the accuracy of any CO2 gas analyzer, it is important to always calibrate the device on an annual basis and according to the manufacturer's guidelines. This calibration typically involves either sending the device back to the manufacturer or performing a calibration by comparing the readings of the analyzer to a known reference gas with a known CO2 concentration.

In addition, it is important to note that the accuracy of the CO2 gas analyzer is just one factor that can affect the overall quality of the weld. Other factors, such as the welding process parameters, welding equipment conditions, and the experience of the welder, can also impact the quality of the weld.

What are the benefits of using a CO2 welding gas analyzer?

  • Improved Weld Quality: Recognizing the correct CO2 concentration in the shielding gas is essential to achieve a high-quality weld. By using a CO2 gas analyzer, welders can ensure that the CO2 concentration is within the correct range, resulting in better weld quality and overall consistency.
  • Increased Efficiency: A CO2 gas analyzer can help welders optimize the flow rate and composition of the shielding gas, which can lead to faster welding speeds and increased productivity.
  • Cost-Savings: Using a CO2 gas analyzer can help reduce the consumption of shielding gas, resulting in cost savings over time.
  • Regulatory Compliance: Many industries are subject to standards that must be audited for compliance. Using a CO2 gas analyzer that records the data can help ensure compliance with these regulations and others set by the American Welding Society (AWS).

Overall, using a CO2 gas analyzer in welding can help improve the quality and consistency of the welds, increase efficiency and productivity, and ensure compliance with regulatory standards.

Is a weld gas detector the same as a weld analyzer?

Although a gas detector and a gas analyzer have similar properties in the way in which they detect gas, they could not be more different in the way they are utilized. 

A gas detector is typically used to detect the presence of certain gases in the air, such as carbon monoxide (CO), carbon dioxide (CO2), hydrogen sulfide (H2S), or oxygen (O2). These gases can be dangerous to human health or in the case of oxygen, pose a risk of explosion if present in certain concentrations. Gas detectors typically use sensors to detect the gas and provide a safeguard for safety with audible/visual alarms to warn welders when the concentration exceeds a certain threshold.

Fixed gas safety detectors like an  or a Carbon Dioxide Safety Alarm are both commonly found in welding applications to protect workers near hazardous gases with audible/visual alarms; as well as meet OSHA codes.

On the other hand, a gas analyzer in welding is specifically used to measure the concentration of certain gases in the shielding gas used during the welding process, such as carbon dioxide. The gas analyzer provides a real-time measurement of the gas concentration and is used to ensure that the gas composition is optimized for the specific welding process being used.

Portable CO2 Welding Gas Analyzer

When it comes to gas analysis in the field, analyzers like the CO2 portable welding gas analyzer provide verification of correct CO2 concentrations in welding gas mixes. This device measures mixed cylinder gas or blended gas at a mixer to provide accuracy of gas and purity of the welds. With preconfigured measurements for C5, C10, C15, C25 and C50 as well as custom ranges from C5-C100, this analyzer is sought after for providing the broadest measurement to the AWS standard. 

While both gas detectors and gas analyzers may both be used to detect gases, they are typically used for different purposes and serve critical in their purpose for detection, sensitivity, and meeting standards.

What is the importance of a gas analysis in welding?

Analyzing gas during the welding process is important for many reasons. While the most critical purpose for analyzing gas could be seen due to quality.  By analyzing the gas composition, welders can ensure that the shielding gas is providing adequate protection for the weld, resulting in the highest-quality and defect-free welds.

In addition, analyzing gases such as carbon dioxide and oxygen in welding can also help optimize the overall process for the welder. By understanding the gas composition and flow rates, welders can further optimize the welding parameters such as speed and wire feed rate to improve the efficiency and productivity of the weld process. 

Further, by gaining gas analysis during weld processes this can also help reduce costs by optimizing the gas used and reduce the consumption of expensive gases like argon or helium that can result in significant cost savings over time. Gaining gas analysis is critical in this field with the use of so many undetectable gas concentrations.

By using a device like a welding gas analyzer welders can ensure that they are gaining the highest quality welds, complying with environmental and safety regulations, and further creating greater efficiency in the workplace. 

Where can I get a welding gas analyzer?

There are many different welding supply stores and manufacturers who specialize in gas detection and welding equipment. While there is no "best" welding gas analyzer, a quality device depends upon the sensing method and the welders overall application and requirements.

When selecting a welding gas analyzer the staff at CO2Meter specializes in over 30 years of gas detection expertise and can walk you through each gas analyzer to find the right device that fits your industry needs and application.

Learn more about welding gas analyzers and selecting the right device or contact a CO2Meter expert at Sales@CO2Meter.com or 877-678-4259.


Older Post Newer Post