All
-
fixed/wall mountCO2 Storage Safety 3 Alarm Horn Strobe Lights
The Remote CO2 Storage Safety 3 Alarm Horn Strobe Lights are designed to provide an additional flashing indicator of carbon...
$159.00 USD$159.00 USD$159.00 USD -
fixed/wall mountRemote CO2 Storage Safety Add-On
These Remote CO2 Storage Safety Add-Ons are designed to provide additional read-outs to be connected for additional alarm points -...
$179.00 USD$179.00 USD$179.00 USD -
fixed/wall mountOxygen Deficiency & Enrichment Alarm Display Add-On
This Oxygen Deficiency & Enrichment Alarm Display Add-On is designed to provide additional read-outs to be connected for additional alarm...
$199.00 USD$199.00 USD$199.00 USD -
AccessoriesCO2 Tank Regulator with Solenoid Valve
The CO2 regulator and flow meter is designed to work with our CO2 Monitor & Controller for Greenhouses. It can support...
$98.00 USD$98.00 USD$98.00 USD -
fixed/wall mountMulti-Gas Fixed Safety System Alarm Horn Strobe (Amber Lens)
The Fixed Multi-Gas Detector Alarm Safety Horn Strobe (Amber Lens) is designed to provide an instant audible and visual indication of a...
$419.00 USD$419.00 USD$419.00 USD -
sensorsGas Sensor Development Kit
The CM-200 Gas Sensor Development Kit is a PCB developed to help customers, students, researchers, OEMs and hobbyists go from...
$252.00 USD$252.00 USD$252.00 USD -
Select optionsAccessoriesIndustrial Strobe Siren
The Industrial Gas Strobe Siren (CM-1029) is designed to provide an additional flashing indicator of a potential gas leak in indoor areas...
$197.00 USD$197.00 USD$197.00 USD -
Select optionsAccessoriesMicro Pumps for Gas Sampling Sensors
These micro gas sampling pumps are designed to provide a constant flow of air across any of our sample draw sensors,...
$230.00 USD$230.00 USD$230.00 USD -
AccessoriesNafion Tubing for Gas Sampling Sensors
The Nafion Tubing for Gas Sampling Sensors is a highly selective, semi-permeable membrane to water vapor. If gases inside Nafion tubing...
$197.00 USD$197.00 USD$197.00 USD -
AccessoriesUSB 2.0 Extension Cable
These active USB extension cables let you increase the distance between your USB-powered CO2 meter or development kit and a...
$32.00 USD$32.00 USD$32.00 USD -
Select optionsAccessoriesSDK / Sensor Replacement Cables
These high-quality cables are replacements for cables included with our SDKs. They allow you to communicate via USB on your...
$55.00 USD$55.00 USD$55.00 USD -
Select optionsAccessoriesWall-Mounted Power Supplies
Our 6VDC and 24VDC replacement power supplies are used to power many of our low voltage, non-grounded devices. Both power...
$30.00 USD$30.00 USD$30.00 USD -
Accessories10,000k Micro Pumps for Gas Sampling Sensor
These micro gas sampling pumps are designed to provide a constant flow of air across any of our sample draw...
$395.00 USD$395.00 USD$395.00 USD -
Maintain the accuracy, reliability, and compliance of your CM-1000 Multi Gas Sampling Portable Data Logger with an official CO2Meter Calibration...
$150.00 USD$150.00 USD$150.00 USD -
Select optionsAccessoriesFilters & Water Traps for Sensor Pump Kit
The Filters and Water Traps for Sensor Pump Kit are designed to protect sensors from receiving excess water and particulate...
$54.00 USD$5.00 USD$5.00 USD -
AccessoriesHydrophobic Vent Filter Kit
Hydrophobic filters cover the inside vents of all our portable ambient air CO2 meters to allow airflow in while keeping out water...
$65.00 USD$65.00 USD$65.00 USD -
Select optionsAccessoriesK30, K33 Flow Through Director
Flow Directors are designed to transform SenseAir K30 and K33 model sensors from diffusion to sample draw sensors. The tube cap kit...
$39.00 USD$39.00 USD$39.00 USD -
AccessoriesSensor Pump Kit
This Sensor Pump Kit contains all the accessories you need to draw samples using our SenseAir or GSS sensors, including...
$197.00 USD$197.00 USD$197.00 USD -
Select optionsAccessoriesSensor Tube Cap Adapter for 20mm Sensors
The CO2Meter Tube Cap Adapter accessory easily converts a wide range of gas sensors from diffusion applications to sampling. Tube...
$59.00 USD$59.00 USD$59.00 USD -
Select optionsAccessoriesSensor Tube Cap Adapter for MX Board
The CO2Meter Tube Cap Adapter converts gas sensors from diffusion applications to sampling. These custom tube caps include a ribbon...
$59.00 USD$59.00 USD$59.00 USD -
AccessoriesSolenoid Shut Off Valve - 1/2 inch
The SV-1030: Safety Shut Off Valve automatically shuts off the gas supply in the room or at the tank for several...
$249.00 USD$249.00 USD$249.00 USD -
AccessoriesSolenoid Shut Off Valve - 3/8 inch
The SV-1029 Safety Shut Off Valve 3/8 inch automatically shuts off the gas supply in the room or at the...
$449.00 USD$449.00 USD$449.00 USD -
Ensure the accuracy and performance of your CM-1650 or CM-1652 Welding Gas Analyzer with an official CO2Meter Calibration Certificate. Maintain...
$399.00 USD$399.00 USD$399.00 USD -
AccessoriesSolenoid Shut Off Valve with Wiring
The SV-1029-W Safety Shut Off Valve with Wiring automatically shuts off the gas supply in the room or at the tank...
$449.00 USD$449.00 USD$449.00 USD
Don't Take Our Word for it, Take Theirs
"Your solutions meet the code requirements and because of you our facility is much safer."
"CO2Meter has helped protect 150+ of our customers sites and ensure they are compliant and safe."
"I would recommend CO2Meter gas training to anyone, it inspired us to be keenly aware of what to inspect."
"I have always worked with CO2Meter because they are the industry leader."
