K30 FS Fast Response 10,000ppm CO2 Sensor
The K30 FS Fast Response 10,000ppm CO2 Sensor module is a maintenance-free CO2 transmitter intended for higher sample rates (2x per second) with minimal noise. It is an accurate, low-cost solution for OEMs who want to integrate CO2 sensing into applications like modified atmosphere packaging (MAP), occupancy detection, or rapid data sampling for process monitoring.
Features
- Fast response to sampled CO2 levels with high variability
- Built-in tube inlet with fast diffusion with or without pump
- Simple to install, pre-calibrated and ready-to-use
- Proven K30 reliability, low cost
- maintenance free in normal applications
- flexible analog and digital outputs
Models
SE-0117 K30 FS 10,000ppm Sensor - for integration into high-volume OEM products. Contact us directly for wholesale pricing on large quantities of this sensor.
CM-0126 K30 FS Sensor Development Kit - Easy to use, simply plug the K30 FS sensor module into your PC via USB. Use our free GasLab® software to measure and graph carbon dioxide levels, to configure the sensor or for data logging.
Specifications
- CO2 Measurement: non-dispersive infrared (NDIR)
- Measurement Range: 0 - 10,000 ppm (0 - 5,000ppm in spec)
- Rate of Measurement: 2Hz (once every 0.5 seconds)
- Response Time: 2 seconds @ .5 l/min tube gas flow
- Outputs: 2 digital, 2 analog
- Scalable Analog voltage outputs
- Programmable Range: 0-10,000 ppm (custom configuration required)
- Repeatability: ± 20 ppm ± 1 % of measured value
- Accuracy: ± 30 ppm ± 3 % of measured value
- Sensor Life Expectancy: > 15 years
- Maintenance Interval: no maintenance required
- Warm-up Time: < 1 min. (@ full specs < 15 min)
Conformance with the standards
- Emission: EN61000-6-3:2001
- Immunity: EN61000-6-2:2001
- RoHS directive 2002/95/EG
Electrical / Mechanical
- Dimensions: 51 × 57 × 14 mm (L x W x H)
- Power Input: 5-14 VDC, stabilized to within 10% (external protection circuits required)
- Current Consumption: 70 mA average
Warranty
- 90 days - See CO2Meter Terms and Conditions.
Development Kit Quick Start Guide (pdf)
Senseair ISO Certification (pdf)
Communication Protocols Manuals (zip)
Sensor Calibration Procedure (pdf)
Troubleshooting Arduino or Raspberry Pi (pdf)
Labview Examples for SenseAir K30 (zip)
Interfacing Raspberry Pi to SenseAir K30 Sensor via UART (pdf)
Raspberry Pi UART Sample Code (zip)
Interfacing Arduino to SenseAir K30 Sensor via UART
Arduino UART Sample Code (ZIP)
Free Easy-to-use GasLab™ Software
This device uses GasLab® software for setup, calibration, data logging, and real-time data analysis. GasLab® makes it easy to export data into a .CSV file that can be imported into any industry-standard software or spreadsheet. GasLab® runs on Windows XP or higher, and free to use with our products.
Accessories
k30-FR k-30-FR SE-0117 SE0117