Oxygen Deficiency Alarm for Low Temperature | CO2Meter.com

Oxygen Deficiency Alarm for Low Temperature

Oxygen Deficiency Alarm for Low Temperature
Regular price $1,599.00

POs or wholesale quantity discounts click here

Please Note: The Latest Update of the RAD-0002-ZR Oxygen Deficiency Safety Alarm for Low Temperature provides users the ability to set alarms for both oxygen depletion and oxygen enrichment. Contact Us to Learn MoreSales@CO2Meter.com

 

Our RAD-0002-ZR Oxygen Deficiency Alarm for Low Temperature, protects staff in enclosed areas near storage cylinders of nitrogen, argon, ammonia, chlorine, propane, nitrous oxide, helium, argon, or other inert gases.

Per both the Occupational Safety and Health Administration (OSHA) and National Institutes of Health (NIH) hazardous conditions may include areas where the oxygen concentrations fall below 19.5% or above 23.5% and require oxygen deficiency monitors.

Our Oxygen Deficiency Alarm for Low Temperatures is commonly used in hospitals, laboratories, pharmaceuticals, cryogenics, process cooling, freezers, manufacturing, food + beverage, and research facilities.

The oxygen deficiency safety monitor will stay accurate at temperatures as low as -50°C, without needing maintenance and does not require zero calibration.

Advantages

  • Operates at severe low temperatures and freezers at -50ºC
  • Real-time oxygen level readout on sensor and remote display
  • Audible and flashing alarm on the sensor and remote display (90db)
  • 3 user-configurable alarms meet all OSHA codes
  • The remote display can be mounted up to 300 feet away
  • Easy to install, no maintenance required
  • CE Listed
  • International Power Supply (included)
  • 10+ years of sensor life expectancy

Add-On Options

RAD-0022-ZR - Add-on remote display unit

CM-1027: Dual Strobe Add On Kit. Plug flashing strobes into both the sensor and remote display to give a more visual alarm. Used in high-noise environments or where required by an inspector.

CM-1026-5: 100-240 VAC Strobe Tower Add-On Kit - yellow, orange, and red indicate alarm levels 1-3. Adds visual notice and high decibel alarm.

CM-1026-6: 24 VDC Strobe Tower Add-On Kit - same features as CM-1026-5 for 24 VDC hard-wired systems

Certificate of Calibration - Available on request in comments at purchase. For factory recalibration order part no. CAL-0001 here

SV-1029 - Solenoid Shut-Off Safety Valve

Specifications

  • Measurement Range: 0-25% display
  • Sensor Life Expectancy: 10 years
  • O2 Deficiency Alarms: AL1 19%, AL2 17%, and AL3 12%. 
  • O2 Enrichment Alarms: AL1 23%, AL2 24% and AL3 25%.
  • Alarm Response Time: < 60 seconds
  • Operating Temperature: -58°F to 122°F (-50°C to 50°C)

    Electrical

    • Power Supply: Output: 12VDC, 2000mA.
    • Power Input: 100~240 VAC, 50/60Hz, 0.6A
    • 25 ft. Ethernet cable (included)
    • Power Consumption: 3 Watts
    • 6 VDC battery backup connections
    • Relays: Peak Current < 2A @ 30 VDC or 250 VAC, SPDT
    • 4-20mA output

    Warranty

    CM-1027: Dual Strobe Add On Kit. Attach a flashing strobe to both the sensor and remote display to give a more visual alarm. Used in high-noise environments or where required by an inspector.

    CM-1026-5: 100-240 VAC Strobe Tower Add-On Kit - yellow, orange, and red indicate alarm levels 1-3. Adds visual notice and high decibel alarm.

    CM-1026-6: 24 VDC Strobe Tower Add-On Kit - same features as CM-1026-5 for 24 VDC hard-wired systems.

    Certificate of Calibration - Available on request in comments at purchase. For factory recalibration order part no. CAL-0001 here.

    • Data Sheets

    • Manuals

    • Technical Documents

    • Videos

    • Additional Resources

    • Case Studies

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    "Easy to install, easy to set up, and easy calibration - just what I was looking for."

    - Phillip Farrar
    Water Plant Superintendent

    Read More Reviews...