1% CO2 + RH/T Data Logger with Display Alarm
The 1% CO2, temperature, and relative humidify portable environmental data logger is designed to measure up to 1% carbon dioxide (10,000ppm), temperature, and relative humidity in remote locations. It “wakes up”, takes readings, stores them in memory, and goes back to sleep.
The battery-operated logger can save up to 15,000 data points at a time, including date, time, CO2, temperature and %RH.
In addition, the data logger has a built-in audible (80db) alarm and an LCD backlit display that provides a visual indication of the current CO2 conditions; Green, Yellow, and Red. The alarm is set by default for LEED levels but can be user programmed to other standards such as OSHA.
This combination of functions provides for a portable monitor alarm system meeting the requirement of Indoor Air Quality surveys as well as OSHA safety standards.
ABOUT CO2 STORAGE SAFETY CODES
This device will NOT meet requirements for CO2 safety monitoring which requires a Fixed/Wall mounted, hard-wired alarm per the NBIC, NFPA, or IFC regulations. Refer to our CO2 Safety Products page for devices that meet your needs.
Call us at (877) 678-4259 toll-free or email us to speak with our technical sales team about purchasing the correct device.
Specifications
- CO2 Measurement: non-dispersive infrared (NDIR)
- Measurement Range: 0 – 10,000 ppm
- Sampling Method: diffusion
- Data logging: 30 seconds to 18 hours sample interval
- Accuracy: ± 30ppm ± 3% of measured value
- Field calibration utility via supplied s/w to N2 or 400 PPM
- Memory: 15,000 log entries maximum, includes time stamp, CO2, Temp, %RH
- Sensor Life Expectancy: > 10 years
- Maintenance Interval: no maintenance required
- Size: 5.75×5.6×1.3in (146×91×33mm)
- LCD displays CO2 in PPM, Temp, and %RH
Power
- 4 AA batteries (not included)
- International Wall Power Supply
Communications Cable
- USB A to USB Mini-B (5-pin) cable
- One cable can be used for multiple sensors
Warranty
- 1 year - See CO2Meter Terms and Conditions.
Free Easy-to-use GasLab® Software
This device uses GasLab® software for setup, calibration, data logging, and real-time data analysis. GasLab® makes it easy to export data into a .CSV file that can be imported into any industry-standard software or spreadsheet. GasLab® runs on Windows XP or higher, and free to use with our products.
System Requirements
- Windows XP SP2 or newer
- Microsoft .Net 3.5 Run time Libraries
Hydrophobic Vent Filter Kit - For high-humidity environments, these hydrophobic filters cover the inside vents to allow air flow but keeps out humidity that affects the sensor. Easy to install, each kit contains a set of filters for 1 unit.