CO2 Multi Sensor Exterior Horn Strobe
The CO2 Multi Sensor Exterior Horn Strobe is designed to provide an additional audible/visual strobe alarm that can be used for all outdoor applications. This device is used cohesively with our CO2 Multi-Sensor Safety System.
*The CO2 Multi-Sensor Safety System is a plug and play set, however requires additional components to create a fully integrated system. See "CO2 Multi Sensor System Parts" below for each component or contact a CO2Meter expert for more information on your application.
CO2 Multi Sensor System Parts
- CO2 Multi Remote Relay (CM-7002)
- Sensor Unit Add On (CM-7003)
- Horn Strobe Add On (CM-7004)
- Main Display Tablet (CM-7005)
Mini Display Tablet (CM-7006)
- CM-7000 Solenoid Shut Off Valve (SV-1029)
- CM-7000 Solenoid Shut Off Valve (1/2") (SV-1030)
- 110 Candela Amber Strobe
- 90-120dB 3KHz Temporal Horn
- Dual CAT5 Connector
- 6 ft. CAT5e Cable
- Dimensions: 5.5" w x 4.5" l x 2.75" h
- Max distance any sensor or horn/strobe can be from the tablet is 250 ft.
- 1 year - See CO2Meter Terms and Conditions
CM-7003 - CO2 Sensor - the CO2 Sensor add-on provides easily addressable sensor capabilities directly to the CO2 multi sensor tablet (up to 12+ sensors per device).
CM-7005 - Main Tablet Only - the CO2 Multi Sensor tablet provides visual indication of gas concentration levels to prevent hazard from occurring in your establishment.
CBL-7002 - Reset Unit Relay Cable - the CAT5 relay cable provides additional configuration for added sensor capabilities of the CM-7000. This cable is designed to be configured with the CM-7002 Reset Unit and can be wired to the CM-1026-5,6 Strobe Towers and SV-1027 Solenoid Valve.
CM-1026-5,6 - CO2 Storage Strobe Tower - designed to provide a flashing indicator, and audible alarm with any of our CM-7000 systems.
SV-1029 Solenoid Safety Shut Off Valve - (3/8 inch valve) designed to be utilized with our CM-7000 CO2 Multi-Sensor System, and can be directly wired to the SV-1029 safety shut-off valve via main tablet or sensor unit relays.
SV-1030 Solenoid Safety Shut Off Valve - (1/2 inch valve) designed to be utilized with our CM-7000 CO2 Multi-Sensor System, and can be directly wired to the SV-1030 safety shut-off valve via main tablet or sensor unit relays.
Calibration Gas - Because of MDOT regulations, calibration gases must be shipped from a certified gas supplier. You can order calibration gas from your local supplier or you can order the following products from CalGasDirect.com