004-0-0013 S8 Miniature 10,000ppm CO2 Sensor
The 004-0-0013 S8 Miniature 10,000ppm (1%) Sensor (formerly known as SE-0119) is designed to be used as a safety switch for indoor control and alarm applications like portable heaters or fresh air ventilation in cars. It is a leader in the next generation of small size, low power, NDIR ambient air CO2 sensors.
- Low Power, Small Footprint Design
- Automatic Background Calibration
- Industry-Standard UART Communication
004-0-0013 S8 10,000ppm CO2 Sensor Only - pinless design for integration into high-volume OEM products. Contact us directly for wholesale pricing on large quantities of this sensor.
CM-0177 S8 CO2 Sensor Development Kit - Easy to use, simply plug the sensor module into your PC via USB. Use our free GasLab® software to measure and graph carbon dioxide, to configure the sensor or for data logging.
- CO2 Measurement: non-dispersive infrared (NDIR)
- Measurement Method: diffusion
- Measurement Range: (0-10,000 ppm)
- Response time: 90% at 2 minutes
- Measurement Interval: 0.5 Hz (every 2 seconds)
- CO2 Accuracy: ± 70ppm ± 3% of measured value
- Communication Options: UART Modbus
- Available Output: analog
- Sensor Life Expectancy: > 15 years
- Maintenance Interval: no maintenance required
- Self-Diagnostics: complete function check on startup
Electrical / Mechanical
- Dimensions: 32.7 × 19.7 × 8 mm (LxWxH) < 8 grams.
- Power Input: 4.5-5.25 VDC
- Max Current: 300 mA
- Power Consumption: 300mA peak, 30mA average
- 90 days - See CO2Meter Terms and Conditions.
Free Easy-to-use GasLab™ Software
This device uses GasLab® software for setup, calibration, data logging, and real-time data analysis. GasLab® makes it easy to export data into a .CSV file that can be imported into any industry-standard software or spreadsheet. GasLab® runs on Windows XP or higher, and free to use with our products.
Had no problems with software or getting hardware to work with GPIO on RPi3B+. Will have to solder connections to sensor though.
We have not received the item, pleas give the freight code etc that I can seek it, I badly need that, the product development of the proto is staying now
I followed the Python example code, but translated it into Ruby. The S8 tended to start timing out on reads after running for a few hours. I upped the timeout parameter to 1 second from a half second and still had timeouts. Also made sure to sleep for a half sec after sending read request, and slept for a couple of seconds between read requests. Flushing input as well.
I am running it USB from a Raspberry Pi Zero. I have had no problems with this same configuration with the Cozir sensor.
Also, the Python example in the application note sends a command of 0x44, whereas the Senseair Modbus document shows 0x04 as the read register command. I tried that and it timed out every time, whereas with 0x44 at least it read for a couple of hours.
Puzzling. I could not recommend this unit as it stands.