iSense Oxygen Sampling Data Logger Controller - NEMA4

iSense Oxygen Sampling Data Logger Controller - NEMA4
iSense Oxygen Sampling Data Logger Controller - NEMA4
iSense Oxygen Sampling Data Logger Controller - NEMA4
Click to enlarge.

Contact us for Pricing

Browse more Oxygen Monitor or additional CO2Meter products.

CM-0185 25%
CM-0195 95%

 

The iSense sampling Data Logger is designed for both permanent and temporary installations in industrial settings. It features a built-in gas sampling pump, internal memory for data logging, a relay and outputs for level control. Use it for:

  • Process Monitoring and Control
  • Packaging with N2 or CO2 flood.
  • Oxygen depletion alarm and or control
  • Long-range Data Collection
  • Temporary Sampling Inspections
  • Remote Deployment in Industrial Settings

To maximize connectivity, the iSense features a M12 (12-pin) connector for RS-485, 4-20mA loop output, a 1A 30VDC (NO/NC/COM) relay and connection to a 24VDC power. These inputs and outputs allow for easy interfacing with existing PLC and RS-485 MODBUS capable data networks. The NEMA 4 / IP-65 rated enclosure makes it suitable for permanent wall-mounted industrial applications.

Inside the iSense  is a instrumentation pump connected to two tube ports on the side of the unit. When the unit is operating, the pump draws gas from one tube port through the O2 sensor and exhaust it from the other. By connecting tubing to the inlet, you can remotely sample gas. By connecting tubing to both ports, you can create a closed-loop system and return the gas back to the original container. This makes the iSense perfect for measuring potentially dangerous high concentrations of O2 in biological applications, or for small volume head space measurements.

In leak detect mode, the display change colors when O2 concentrations go over or under a programmable level. This settings can be changed in the software.

Free Easy-to-use GasLab® Software 

This device uses GasLab® software for setup, calibration, data logging, and real-time data analysis. GasLab® makes it easy to export data into a .CSV file that can be imported into any industry-standard software or spreadsheet. GasLab® runs on Windows XP or higher, and free to use with our products.

Download GasLab Software

Specifications

  • Measurement Ranges: 0-25%, 0-95% Oxygen
  • Sampling Method: Tube sampling (0.5 liters/minute)
  • 2 second measurement cycle
  • Maintenance Interval: No maintenance required
  • Size: 5.75×5.6×1.3in (146×91×33mm)
  • Tubing sizes: 3/32 or 1/8"
  • 4-20 mA signal
  • RS485 MODBUS
  • Relay output; (NC/NO/COM) programmable to control or alarm O2 concentration
  • USB weather proof connection
  • Built-in 10,000 hour gas micro-sampling pump

Accessories Included

  • 1- 6' USB Cable
  • 1- M12, 12 Position 5M Cable (CM-0127)
  • 1- Fitting, Tubing & Filter Kit
  • 1- Extreme Conditions Moisture Trap & Filter (CM-0103)

Options

Power

  • 24 VDC

System Requirements for Data Logging or Changing Defaults

  • Windows XP SP3 or higher
  • Microsoft .Net Framework 3.5 SP1
  • Pentium 4 (or newer) operating at 2.4 Ghz or faster
  • 1 GB of Random Acess Memory (RAM)
  • Hard Disk Space with at least 20 Megabytes (MB) free (200+MB recommended for longs and application files)

Warranty

  • 1 Year

Manual (pdf)

Dimensional Drawings (pdf)